Home › Asphalt Resurfacing & Overlays
Extend the life of your driveway with professional asphalt resurfacing in Savannah, GA. Our team evaluates your existing base and surface, then installs a smooth asphalt overlay when conditions are right. Resurfacing can correct minor waves, small cracks, and weathered blacktop, giving your driveway a fresh, uniform finish at a lower cost than full replacement.
Precision Asphalt Savannah provides professional asphalt resurfacing throughout Savannah, GA, Georgia and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (912) 922-3568 or request your free quote.
Asphalt Resurfacing & Overlays in Savannah, GA
If your driveway, parking lot, or private road is cracked and rough but the base still feels solid under your tires, asphalt resurfacing can often restore it without the cost of a full tear out. At Precision Asphalt Savannah, we focus on extending the life of your pavement by installing a new asphalt layer over the existing surface, called an overlay, tailored to Savannah’s heat, humidity, and rain patterns.
Resurfacing is ideal when the surface is worn, oxidized, or lightly alligatored, but the underlying foundation is not failing. Instead of replacing everything, we mill or grind the top portion, correct drainage and structural issues, then install a new, smooth asphalt layer. This typically gives you 8 to 15 more years of service when done correctly.
Because Savannah’s summers are hot and wet, we select mixes and application temperatures that resist rutting, softening, and moisture intrusion. Precision Asphalt Savannah crews schedule resurfacing around local weather, aiming for dry conditions and moderate temperatures so your new surface bonds properly and cures evenly.
How We Evaluate Your Pavement for Resurfacing
Before recommending asphalt resurfacing, we perform a detailed on site inspection. We walk the pavement, probe soft spots, and look for signs that the base or subgrade is failing, such as deep depressions, wide cracks that keep reopening, or potholes that come back after simple patching.
We also check slope and drainage. In Savannah, standing water is one of the biggest enemies of asphalt. We look at how your lot drains during heavy storms and identify low spots, birdbaths, or areas where water flows toward buildings or doorways. If overlaying would trap water, we design corrections into the resurfacing plan instead of simply paving over the problem.
Our team documents conditions with photos and measurements. You will see exactly which areas can be resurfaced, which must be patched or milled deeper, and if any sections are too far gone and require full-depth replacement. Precision Asphalt Savannah explains the options in everyday language, with clear prices for each approach so you can make an informed decision.
Our Asphalt Resurfacing & Overlay Process
Once resurfacing is the right solution, Precision Asphalt Savannah follows a structured, transparent process so you know what to expect from first day to final roller pass.
1. Surface preparation and cleaning: We remove loose debris, vegetation, dirt, and oil deposits using blowers, brooms, and power washing where appropriate. Oil spots are primed so they do not bleed through and weaken the bond with the new asphalt.
2. Milling or edge key cuts: In most overlays, we mill or grind the perimeter where the new asphalt meets concrete, catch basins, or roadways. This creates a smooth transition so the overlay does not sit higher than curbs, sidewalks, or garage slabs. On some Savannah residential driveways, we simply create key cuts at the street and garage to maintain proper heights.
3. Structural repairs and leveling: Any potholes or severely cracked areas are saw cut, excavated, and patched with hot mix asphalt before the overlay. We may add leveling courses to correct dips and improve drainage across parking lots so afternoon thunderstorms do not leave long-lasting puddles.
4. Tack coat application: A thin, even layer of asphalt emulsion, called tack coat, is sprayed over the prepared surface. This acts like glue that helps the new asphalt bond securely to the old pavement, which is critical in our coastal climate where heat and moisture try to separate the layers over time.
5. New asphalt overlay installation: We place a new asphalt layer, typically 1.5 to 2 inches thick for residential driveways and up to 3 inches or more for commercial lots or truck lanes. Material is laid with a paver for consistent thickness, then compacted with steel drum and rubber tire rollers to lock the aggregate together.
6. Joint sealing and finishing: We compact all seams, rake edges neatly, and address any areas that need touch up for drainage or smoothness. After cooling, we apply new pavement markings or schedule striping, speed bumps, and other features as requested.
Material Options, Mix Design, and Local Considerations
In the Savannah area, asphalt must handle high surface temperatures, frequent summer showers, and occasional heavy vehicles, sometimes all in the same day. Precision Asphalt Savannah works with regional plants to select mixes that balance durability, smoothness, and cost for overlays.
For residential driveways, we often recommend a fine or medium surface mix that provides a smooth finish for walking and driving, while still resisting minor scuffing from tight turns. For commercial properties and HOA roads, we choose mixes with a stronger aggregate structure that holds up to delivery trucks, garbage trucks, and regular traffic.
The thickness of the overlay is matched to how you use the pavement. Light duty residential areas might be resurfaced with a 1.5 inch layer. Busy parking lots or dumpster pads near restaurants typically receive a thicker overlay or multiple lifts to reduce rutting from stopped heavy vehicles in summer heat.
We also consider color and aging. Savannah’s intense sun oxidizes asphalt, causing it to gray out faster. A properly compacted overlay with the right binder content slows that process and makes the surface less likely to ravel or shed stones. If you want added protection, we can plan for a sealcoat a year or so after the overlay cures, which locks in oils and improves appearance.
Costs, Timelines, and What Affects Your Price
Customers often want to know why one resurfacing job costs more than another. With overlays, most of the price is driven by square footage, the thickness of the new layer, and how much prep and repair work is needed before we can pave.
A small Savannah driveway that needs light crack filling, a tack coat, and a standard overlay will be on the lower end of the cost range, while a heavily cracked commercial lot that needs milling, base patching, and drainage corrections will cost more. Access also matters. If our crews can reach your pavement easily with trucks and pavers, work goes faster and costs stay down.
Season and scheduling play a role too. In coastal Georgia, we try to avoid heavy resurfacing on days with strong afternoon storm chances. If your schedule is flexible, we can often place your work on days when conditions are ideal, which helps ensure quality and can sometimes reduce costs if we can coordinate your project with other nearby jobs.
During your free estimate, Precision Asphalt Savannah provides a written scope that breaks down preparation, repairs, overlay thickness, and any optional items such as striping, curb repair, or sealcoating. There are no surprise line items added at the last minute. If we uncover an unseen issue, like a deep soft spot, we show it to you on site and explain the options clearly before proceeding.
Aftercare, Lifespan, and When Resurfacing Is Not Enough
Once your new overlay is installed, a few simple steps will help it last. We typically recommend keeping vehicles off the surface for at least 24 hours in summer, slightly longer for heavier trucks. Avoid parking trailers or placing sharp objects like motorcycle kickstands on fresh asphalt until it fully hardens.
Regular sweeping and keeping drains clear will help water move off the surface instead of sitting in low spots. In shaded Savannah areas where moisture lingers, algae can grow. This is mostly cosmetic, but periodic cleaning keeps the surface safer and more attractive.
With proper installation and routine care, an asphalt resurfacing project in our region often lasts 8 to 15 years. Higher traffic areas or locations with constant heavy trucks may experience earlier wear, but the overlay can usually be rejuvenated or resurfaced again if the base remains solid.
There are cases where resurfacing is not the right answer. If your pavement has chronic flooding, widespread base failure, or height restrictions near garages, gates, or thresholds that cannot handle even a thin overlay, we will tell you and propose partial or full-depth reconstruction instead. Precision Asphalt Savannah’s goal is to match the solution to your actual conditions so you do not spend money on a fix that will not hold up.
If you are unsure whether you need asphalt resurfacing, a few patches, or complete replacement, we are happy to inspect your property in person and walk you through clear, honest recommendations tailored to your Savannah, GA pavement.
